12.6V - 16-8V Electronic Inverter with remote control

The inverter will have two connection systems, input, in which the battery will be connected through an internal XT90 female connector, compatible with our battery models. And output, which will be connected to the motor you want to use to proceed to its control through an external XT90 male connector.


It also has a system of connection of man overboard, this is connected in a magnetized way and in case of emergency it will be disconnected automatically in case of an outboard fall. This system includes a safety lanyard. It must be connected for the device to function properly.

The remote control has three control buttons:

STOP button: Stops the motor whatever the direction of travel and speed of the motor.

Power increase button +: Increases the power progressively forward from 0 to 100%.

Power decrease button -: Progressive power decrease backwards from 0 to 50%.  For safety reasons, the reverse power is limited to 50%.

COMPATIBLE AND TESTED WITH MOTORS OF:

-Float Plus versión 1

-Minnkota Endura 30lb

-Minnkota endura 40lb